| Topic: |
Religions > Atheism |
| User: |
"=?ISO-8859-1?Q?=AA=BA=AAandcaroleRtm?=" |
| Date: |
27 Nov 2007 03:38:29 PM |
| Object: |
Re: How to clean coolant reservoir ?? |
On Nov 27, 4:35=C2=A0pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole.=
...@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to a
4x6 !! - I just played with the adjustable hydraulic cylinder last
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails lube. reinstall all parts. test and adjust gibs as
necessary.
.
|
|
| User: "jake" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 05:06:40 PM |
|
|
On Nov 27, 3:38=C2=A0pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole.=
...@gmail.com>
wrote:
On Nov 27, 4:35=C2=A0pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarol=
e...@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to a
4x6 !! - I just played with the adjustable hydraulic cylinder last
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs as
necessary.
Gosh, Webtv. Get yours today!
Jake.
.
|
|
|
| User: "Fart Bubbles o o o" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 05:44:06 PM |
|
|
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole...@=
gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole..=
..@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to a
4x6 !! - I just played with the adjustable hydraulic cylinder last
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails lube. reinstall all parts. test and adjust gibs as
necessary.
Gosh, Webtv. Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o O o o O
o O o o
o o oo
o o
Fart Bubbles
.
|
|
|
| User: "ScottyFLL" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 08:20:11 PM |
|
|
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole..=
..@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to =
a
4x6 !! - I just played with the adjustable hydraulic cylinder last=
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out=
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of=
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs =
as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles-
LOL! They look great! http://tinyurl.com/yvah46
.
|
|
|
|
| User: "bobandcarole" |
|
| Title: Re: How to clean coolant reservoir ?? Make Sharon SharfDouche...LOL!!! |
28 Nov 2007 08:16:13 PM |
|
|
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole..=
..@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to =
a
4x6 !! - I just played with the adjustable hydraulic cylinder last=
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out=
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of=
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs =
as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
Is posting obvious fake photos the best you can do?
Speaking of *****, have you slopped Sharon Scharf the pig today?
Here piggy piggy,,,SOOOWIE!! LOL
Here she comes now, heel *****, heel..
Oink..Oink...
http://img411.imageshack.us/img411/304/0006phototy4.jpg
/}
@###{ ]::::::bobandcarole::::::>
\}
Cutting ***** Scott Salberg to pieces daily
.
|
|
|
| User: "=?ISO-8859-1?B?qrqqYW5kY2Fyb2xl?=" |
|
| Title: Re: How to clean coolant reservoir ?? Make Sharon SharfDouche...LOL!!! |
28 Nov 2007 08:23:28 PM |
|
|
On Nov 28, 9:16=C2=A0pm, bobandcarole <bobandcarole...@gmail.com> wrote:
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:=
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcaro=
le...@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared t=
o a
4x6 !! - I just played with the adjustable hydraulic cylinder la=
st
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank i=
s
lined with a sticky,greasy brown muck - any tricks to clean it o=
ut
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward o=
n
the 8x. while out-of-the-box, the machine runs great, sooner or late=
r
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.=
pull unit off compound. note that there are no nuts. the compound is=
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut=
..
pull the slide off. note that if you have the optional chip guard on=
the back, you will need to remove this first. this is the underside =
of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull=
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gib=
s as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
Is posting obvious fake photos the best you can do?
Speaking of *****, have you slopped Sharon Scharf the pig today?
Here piggy piggy,,,SOOOWIE!! =C2=A0 LOL
Here she comes now, heel *****, heel..
Oink..Oink...
http://img411.imageshack.us/img411/304/0006phototy4.jpg
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /}
=C2=A0@###{ ]::::::bobandcarole::::::>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0\}
Cutting ***** Scott Salberg to pieces daily- Hide quoted text -
- Show quoted text -
.
|
|
|
|
| User: "=?ISO-8859-1?B?qrqqYW5kY2Fyb2xl?=" |
|
| Title: Re: How to clean coolant reservoir ?? Make Sharon SharfDouche...LOL!!! |
28 Nov 2007 08:21:34 PM |
|
|
On Nov 28, 9:16=C2=A0pm, bobandcarole <bobandcarole...@gmail.com> wrote:
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:=
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcaro=
le...@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared t=
o a
4x6 !! - I just played with the adjustable hydraulic cylinder la=
st
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank i=
s
lined with a sticky,greasy brown muck - any tricks to clean it o=
ut
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward o=
n
the 8x. while out-of-the-box, the machine runs great, sooner or late=
r
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.=
pull unit off compound. note that there are no nuts. the compound is=
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut=
..
pull the slide off. note that if you have the optional chip guard on=
the back, you will need to remove this first. this is the underside =
of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull=
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gib=
s as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
Is posting obvious fake photos the best you can do?
Speaking of *****, have you slopped Sharon Scharf the pig today?
Here piggy piggy,,,SOOOWIE!! =C2=A0 LOL
Here she comes now, heel *****, heel..
Oink..Oink...
http://img411.imageshack.us/img411/304/0006phototy4.jpg
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /}
=C2=A0@###{ ]::::::bobandcarole::::::>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0\}
Cutting ***** Scott Salberg to pieces daily- Hide quoted text -
- Show quoted text -
Is posting obvious fake photos the best you can do?
Speaking of *****, have you slopped Sharon Scharf the pig today?
Here piggy piggy,,,SOOOWIE!! LOL
Here she comes now, heel *****, heel..
Oink..Oink...
http://img411.imageshack.us/img411/304/0006phototy4.jpg
/}
@###{ ]::::::bobandcarole::::::>
\}
Cutting ***** Scott Salberg to pieces daily
.
|
|
|
|
| User: "bobandcarole" |
|
| Title: Re: How to clean coolant reservoir ?? Make Sharon SharfDouche...LOL!!! |
28 Nov 2007 08:29:27 PM |
|
|
On Nov 28, 9:16=C2=A0pm, bobandcarole <bobandcarole...@gmail.com> wrote:
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:=
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcaro=
le...@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared t=
o a
4x6 !! - I just played with the adjustable hydraulic cylinder la=
st
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank i=
s
lined with a sticky,greasy brown muck - any tricks to clean it o=
ut
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward o=
n
the 8x. while out-of-the-box, the machine runs great, sooner or late=
r
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.=
pull unit off compound. note that there are no nuts. the compound is=
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut=
..
pull the slide off. note that if you have the optional chip guard on=
the back, you will need to remove this first. this is the underside =
of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull=
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gib=
s as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
Is posting obvious fake photos the best you can do?
Speaking of *****, have you slopped Sharon Scharf the pig today?
Here piggy piggy,,,SOOOWIE!! =C2=A0 LOL
Here she comes now, heel *****, heel..
Oink..Oink...
http://img411.imageshack.us/img411/304/0006phototy4.jpg
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /}
=C2=A0@###{ ]::::::bobandcarole::::::>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0\}
Cutting ***** Scott Salberg to pieces daily- Hide quoted text -
- Show quoted text -
Is posting obvious fake photos the best you can do?
Speaking of *****, have you slopped Sharon Scharf the pig today?
Here piggy piggy,,,SOOOWIE!! LOL
Here she comes now, heel *****, heel..
Oink..Oink...
http://img411.imageshack.us/img411/304/0006phototy4.jpg
/}
@###{ ]::::::bobandcarole::::::>
\}
Cutting ***** Scott Salberg to pieces daily
.
|
|
|
|
|
| User: "ScottyFLL" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 08:30:59 PM |
|
|
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole..=
..@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to =
a
4x6 !! - I just played with the adjustable hydraulic cylinder last=
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out=
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of=
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs =
as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
LOL!!!!!!!!!!!!!!!!!! http://tinyurl.com/yp6pnl
.
|
|
|
|
| User: "ScottyFLL" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 08:22:35 PM |
|
|
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole..=
..@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to =
a
4x6 !! - I just played with the adjustable hydraulic cylinder last=
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out=
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of=
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs =
as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
http://tinyurl.com/yp6pnl
.
|
|
|
|
| User: "ScottyFLL" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 08:24:26 PM |
|
|
On Nov 28, 6:44=C2=A0pm, Fart Bubbles o o o <fartbubb...@walla.com> wrote:
On Nov 28, 6:06 pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole..=
..@gmail.com>
wrote:
On Nov 27, 4:35 pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarole=
....@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to =
a
4x6 !! - I just played with the adjustable hydraulic cylinder last=
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out=
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of=
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs =
as
necessary.
Gosh, Webtv. =C2=A0Get yours today!
Jake.
LOL
Have you see bobandcarol's wedding picture:
http://tinyurl.com/yvah46
Season's Greetings!
o =C2=A0O =C2=A0o =C2=A0 o =C2=A0O
=C2=A0 =C2=A0o =C2=A0O o =C2=A0o
=C2=A0 =C2=A0 o =C2=A0o oo
=C2=A0 =C2=A0 =C2=A0 o o
=C2=A0 =C2=A0 =C2=A0 =C2=A0Fart Bubbles- Hide quoted text -
- Show quoted text -
http://tinyurl.com/yp6pnl
.
|
|
|
|
|
| User: "ScottyFLL" |
|
| Title: Re: How to clean coolant reservoir ?? |
28 Nov 2007 05:14:34 PM |
|
|
On Nov 28, 6:06=C2=A0pm, jake <bluesch...@gmail.com> wrote:
On Nov 27, 3:38=C2=A0pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcarol=
e...@gmail.com>
wrote:
On Nov 27, 4:35=C2=A0pm, "=C2=AA=C2=BA=C2=AAandcarole(R)(tm)" <bobandcar=
ole...@gmail.com>
wrote:
On Nov 23, 4:10=EF=BF=BDam, TMN <nash....@gmail.com> wrote:
Hi
I upgraded to Rong Fu 7x12 band saw - what a pleasure compared to a
4x6 !! - I just played with the adjustable hydraulic cylinder last
night - wife thought it strange !!!
The saw has been standing for a long time and the coolant tank is
lined with a sticky,greasy brown muck - any tricks to clean it out
easily the hole the pump fits into is quite small.
thanks
Tim
Taking the carriage/cross-slide/compound apart is straight-forward on
the 8x. while out-of-the-box, the machine runs great, sooner or later
you'll want to clean it. Here's a quick how-to.
fine feed cross slide
unscrew the fine feed handle until the cross slide screw disengages.
pull unit off compound. note that there are no nuts. the compound is
=C2=A0the nut.
undo the two jam nuts and pull the assembly apart.
clean and lube. there are two nuts holding the compound
to the carriage. undo the nuts. note that there are two
t-slot bolt that allow you to rotate the compound. the hole
at the bottom of the grooved circle is where you remove/insert the
bolts.
here is the underside of the compound.
crank the cross slide handle until the screw disengages from the nut.
pull the slide off. note that if you have the optional chip guard on
the back, you will need to remove this first. this is the underside of
the
slide. note that there is a cast iron nut with anti-backlash
capabilities.
there are no screws in it.
the nut can be removed for cleaning or swapping by removing the
philips screw on the top of the slide. note the gummed up screw.
unscrew the two bolts on the from of the handle/retaining unit. pull
screw and unit out. disassembly is straight-forward.
here are the parts. clean and lube bearings. clean the cross slide
carri dovetails =C2=A0lube. reinstall all parts. test and adjust gibs as=
necessary.
Gosh, Webtv. =C2=A0Get yours today!
LOL!
.
|
|
|
|
|
| User: "ScottyFLL" |
|
| Title: Re: How to clean coolant reservoir ?? |
27 Nov 2007 07:14:21 PM |
|
|
On Nov 27, 4:38 pm, "=AA=BA=AAandcarole(R)(tm)" <bobandcarole...@gmail.com>
wrote:
"we are a white cpl, 40s, looking for bi female, or cpl w/bi female
for hot times. she is 5/7 fullfigured, 44dd tits, and a juicy shaved
***** that squirts when she cums. he is 6/1 225, hairy chest, short
beard, and 7 inches. we seek people in the louisville, southern
indiana area. we can exchange pics. if interested, email
us..."
From:
Subject: SOUTHERN INDIANA COUPLE SEEKS.......
Date: 2000/03/15
Message-ID:
<16150-38CFF923...@storefull-155.iap.bryant.webtv.net>#1/1
X-Deja-AN: 597971835
Content-Transfer-Encoding: 7Bit
Organization: WebTV Subscriber
Content-Type: Text/Plain; Charset=3DUS-ASCII
Mime-Version: 1.0 (WebTV)
X-WebTV-Signature: 1
ETAtAhR2SkL1wrRFHUycTObIdbiDles6xAIVALFK3FZBTgD7zo+rTuS69JTfKwbp
Content-Disposition: Inline
Newsgroups: alt.personals.big-folks
http://img505.imageshack.us/img505/3458/bobbottlerz8.jpg
.
|
|
|
|
|
Related Articles |
|
|
