| Topic: |
Science > Physics |
| User: |
"brian a m stuckless" |
| Date: |
01 Apr 2006 03:23:58 PM |
| Object: |
Gravity=Anti-Buoyancy. |
$$ GRAViTY is Anti-BUOYANCY.
$$ Anti-BUOYANCY: Where everything is in a state of
$$ buoyant EQUiLiBRiUM "weightlessness" in ambient
$$ ..as far as MEASURED g goes, there is NO "gravity".
$$ To wit: Where G*M1/(n - 1)*rA^2=3Dg, and n equal ONE.
Archimedes' BATH was DisPLACED by
the his tooth CAViTY.!! That is HOW the
KiNG got DUPED out of gold ..NOT in his crown.!!
<< I want a theory that explains the mechanism of falling. >>
2. Some reference nomenclature
Remember volt*amp*sec energy eV is - m1*v1^2 / 2, --and
using one excludes the other, per event. NO energy state can be
both increased and decreased, at once, in the SAME calculation.
Fine STRUCTURE variable (n - 1) =3D (mD / m1) - 1
=3D (mD - m1) / m1 =3D (mD - m1) / (do - di)*Vi
=3D mS / m1 =3D (mD - m1)*Po / (Po - Pi)*Vi*dx.
=3D (mD - m1)*v1^2 / eG =3D (vescape)^2 / 2*v1^2.
SiGNETiC mass mS =3D (n - 1)*m1 =3D mD - m1, where n =3D mD / m1
--and where do and di are the iNside and OUTside densities
of evacuated SHELL mass m1, Vi is it's inside volume, (n - 1)*v1
is the REQUiRED velocity at radius r1 and potential gravitational
acceleration g. CAViTY Volume Vi =3D cavity mass / cavity density.
Ambient DisCHARGE mass mD =3D (n)*m1 =3D mS + m1.
Ambient DisCHARGE mass mD controls the sign and magnitude of g and
v1 at r. This is AMBiENT mass discharged from the SHELL mass CAViTY.
The REQUiRED velocity (n - 1)*v1 varies with mD.
4. Skypunt docking (n - 1)
Hovering is an orbital period T1 with a limit of infinity, and the
Newtonian orbital velocity constant v1^2 is equal to g*r1, where g
would be the free-falling gravitational acceleration at the orbital
radius r1. In this context, note that:
a.) If mD =3D m1, the SHELL mass m1 is hovering in the ambient
medium. If mD =3D 0, then the SHELL mass m1 in the ambient
gravitational density gradient is either orbiting at radius r1 and
velocity v1, free-falling down at - g, or at rest in a ground state.
b.) --the velocity 'required' to maintain radius r1 increases with
the SiGNETiC mass mS =3D eS / c^2 =3D mD - m1
=3D (n - 1)*m1 =3D G*M1*m1 / r1^2*g =3D G*M1*m1 / r1*v1^2
c.) --that g 'as measured', and its + or - sign varies with (n - 1).
The gravitational acceleration varies with the SiGNETiC mass mS,
and accordingly the BUOYANCY of m1.
d.) --that (n - 1) manages the sign of g, v1, and G where:
G*M1 / r1^2 =3D (n - 1)*g =3D (n - 1)*v1^2 / r1.
SiGNETiC mass mS varies with the REQUiRED (n - 1)* v1 and gives
v1 and gravitational acceleration g each its REQUiRED sign.
SiGNETiC mass is the mD -m1 'mass difference=91 and can be EiTHER
positive, zero, OR negative.
5. Nature abhors 'NO medium'
NOTE: The very least MEASURED medium on EARth in which light has
ever actually been measured ..had:
~10^7 times MORE atoms / m^3 than the SPACE-shuttle test media,
~10^10 times MORE atoms / m^3 than iNTERstellar space.
a. DEEP space:
[1 atom / cubic meter]
b. iNTERstellar space:
[1,000,000 atoms / cubic meter]
c. SPACE suttle:
[1,000,000,000 atoms / cubic meter]
d. Very least TEST medium ever achieved on earth:
[1, 000,000,000,000 atoms / cubic meter]
e. Very least LiGHT-speed test (as-measured on earth):
[10,000,000,000,000,000 atoms / cubic meter]
f. Molar gas standard at STP:
[10,000,000,000,000,000,000,000,000 atoms / cubic meter].
8. Archimede's cavity filling missing
The GUESS iSS negates GR-tivity and AEther, when the 'proper'
missing BUOYANCY factor (n - 1) is NOT left out of Newton's law.
Assume a shell mass m1, enclosing a large cavity, is sitting
SUBmerged at the bottom of a gradient medium, and that the
cavity is filled with ambient medium at ambient temperature,
and ambient pressure & density. As per Archimede's Principle:
SOLiD volume =3D Total ambient displacement
An 'ADDENDUM to Archimede's Principle' is required, to account
for the displacement of the medium by ANY SUBmerged 'cavity'
contained by the shell mass m1, as follows:
Solid volume + cavity =3D total ambient medium displacement
=3D Vm1 + Vi =3D Vm1 + {m1 / (do - di)} , --hovering SUBmerged.
A SUBmerged object with a cavity displaces a volume of ambient
equal to the volume of shell material itself, plus the displacement
of any cavity the the shell encloses. Archimede's Principle is
independent DENSiTY for a CAViTY enclosed within a SUBMERGED object.
The PERiDiODiC TABLE accounts for the various densities and
displacements of all known solids, gases, and plasmas, etc, --but,
CAViTiEs or HOLEs which are contained by a stiff shell also have
densities and displacements relative to the OUTside AMBiENT.
SUBmerged SHELL mass m1 will hover in the media when its CAViTY
disCHARGEs a mass of ambient media equal to the shell mass m1,
..irrespective of the DENSiTY of the shell itself.
Hovering is independent of any fixed density of the actual
SHELL mass m1, itself, --as long as m1 remains SUBMERGED with
respect to any ambient media, --but is NOT independent of the
density of its CAViTY mass, with respect to any AMBiENT MEDiA.
There is no obvious reason to have to SPECiFY shell strength (S)
UNLESS its REQUiRED to define a SPECiFiC material for the shell m1.
HOVERiNG can be maintained by a stiff sealed shell mass in AMBiENT
by combination of the following:
1. a difference in temperature --hot air lift
2. a difference in pressure --the reduction method
3. a difference in density --lighter medium method
--all between inside and outside of the containment shell
4. a SUBsequent orbital velocity (n - 1)*v1 required to maintain
an hovering radius r1 ..lift-off rocket, airplane & copter between.
NOTE: States 1, 2, & 3 are separated from state 4 by a significant
somewhat FORBiDDEN ZONE with a very un-likely probability of being
able to support EiTHER method of hovering.
Hovering.. Vi*(do - di) =3D shell mass m1
=3D (cavity volume)*(DELTA density)
=3D (shell volume Vs)*(shell density ds)
=3D Vs*ds
=3D Vi*(Po - Pi)*(unit density) / Po
=3D 4*Vi*(SHELL stress S)*(unit density) / Po*{(dia. / thickness) + 1}
=3D 4*Vi*(thickness)*(S)*(unit density) / Po*(diameter + thickness)
=3D {(Vi*do) - (inside mass mi)} / n
=3D (mD - m1) / (n - 1)
=3D mS / (n - 1)
=3D mS / {(mD / m1) - 1}
=3D mD / n
=3D mS*r1^2*g / G*M1
=3D mS*r1*v1^2 / G*M1
--where:
SiGNETiC mass mS varies with the required velocity (n - 1)*v1.
mD =3D Amount of ambient disCHARGE mass from m1 cavity
=3D n*m1 =3D Vi*do - mi =3D mS + m1 , --(at hovering mD =3D m1).
Vi =3D pi*(dia)^3 / 6 =3D Hovering spherical cavity volume
v1 =3D m1 velocity
do =3D OUTside ambient density
di =3D iNside ambient density
r1 =3D Centre to centre separation of M1 to m1 radius
g =3D Potential gravitational acceleration at radius r1
Po =3D OUTside ambient pressure
Pi =3D iNside ambient pressure
dia =3D Hovering inside diameter of m1 cavity
th =3D Hovering shell mass m1 thickness
M1 =3D Typically a central mass
$$$$ $$$$ $$$$ $$$$ $$$$
11. Nature abhors an EMPTY cavity
There is no particular ambient medium iNSiDE a container-cavity,
..by definition. Any EQUiVALENT 'reduced ambient media' is
RELATiVE to the "typical" OUTSiDE ambient media.
VACUUM is literally NON-existant, by molar accounting. BUT,
for a CAViTY with a PARTiCULAR volume, it is related to a
PARTiCULAR amount of displaced SUBSTANCE (N - nd)
=3D MOLAR cavity DiSPLACEMENT =3D N*(1 - xd) mol
--where: nd =3D N*xd
--and: xd =3D nd / N =3D the molar fraction of the amount of
iNSiDE ambient substance nd, initially at equilibrium with the
OUTSiDE ambient, which gets DiSCHARGED from a cavity containing
a TOTAL mixed AMOUNT of substance N. (See: AMBiENT MEDiA, above.)
A practical basic STANDARD for that is the molar fraction xd which
is currently discharged at POiNT of BUOYANCY in the ambient media.
The amount of substance nd displaced, at the point of buoyancy in
the ambient media, is exactly equal to the AMOUNT of SUBSTANCE of
the container's SHELL mass m1 (..plus any LOAD, of course).
$$$$ $$$$ $$$$ $$$$ $$$$ $$$$
When people say ''vacuum'' they are invariably talking about
REDUCED container-cavity media. The 'reduction' of a cavity is
relative to outside ambient. A REDUCED cavity is characterized
by a relative DiFFERENCE in shell STRESS, and between particular
iNside and OUTside densities (i.e. temperatures & pressures). It
seems quite easy to confuse 'reduced pressure', --or technical
'REDUCTiON', with a VACUUM (i.e. ..the MENTAL dimension or a
MENTAL condition).
NATURE abhors an EMPTY container CAViTY.
EpiLOG: NATURAL Evolving CREATURE.
Theories are mental concepts of physical creations,
and however free we are to CREATE them in our mind,
there are no PHYSiCAL concepts or PHYSiCal theories.
We justifiably STRUCTURE some uniquely determined
concepts to help us understand as wide a range of
physical and mental NATURAL phenomena as possible.
Go-go Google GROUPs: < My BiGGER bang.!! > and < ascii iSS GUESS >.
< http://groups.google.com >< Archimede's cavity filling missing >.
$$ Gravity=3DAnti-Buoyancy. ```Brian A M Stuckless. Ph.T (Tivity).
$$ Sincerely. B A STUCKLESS iNSPECTiON and SUPERViSiON.
.
|
|
| User: "Felix Rawlings" |
|
| Title: Re: Gravity=Anti-Buoyancy. |
01 Apr 2006 03:40:15 PM |
|
|
On Sat, 01 Apr 2006 21:23:58 +0000, brian a m stuckless wrote:
$$ GRAViTY is Anti-BUOYANCY. $$ Anti-BUOYANCY: Where
everything is in a state of $$ buoyant EQUiLiBRiUM "weightlessness"
in ambient $$ ..as far as MEASURED g goes, there is NO "gravity". $$
Why do you write LIkE ThIS?
.
|
|
|
| User: "phy" |
|
| Title: Re: Gravity=Anti-Buoyancy. |
01 Apr 2006 06:53:18 PM |
|
|
Felix Rawlings <fraw@yahoo.com> wrote in
news:pan.2006.04.01.21.40.15.493637@yahoo.com:
Why do you write LIkE ThIS?
Because he R B Stuckless.
-phy
.
|
|
|
|
|
|
Related Articles |
|
|
