| Topic: |
Science > Physics |
| User: |
"cnctut" |
| Date: |
20 Aug 2006 02:11:10 PM |
| Object: |
Octane Ratings for Ethyl/Methyl |
I posted this on sci.chem but no takers--anyone here able to help?
Gents, could someone point me to the octane ratings for ethyl and
methyl alcohol? I thought they were listed in CRC, but I can't put my
finger on the numbers now.
Thanks
Tut
.
|
|
| User: "" |
|
| Title: Re: Octane Ratings for Ethyl/Methyl |
21 Aug 2006 11:25:10 AM |
|
|
cnctut wrote:
I posted this on sci.chem but no takers--anyone here able to help?
Gents, could someone point me to the octane ratings for ethyl and
methyl alcohol? I thought they were listed in CRC, but I can't put my
finger on the numbers now.
Thanks
Tut
You get interesting info at
http://en.wikipedia.org/wiki/Octane_rating#Examples_of_octane_ratings
Marcel Luttgens
.
|
|
|
| User: "cnctut" |
|
| Title: Re: Octane Ratings for Ethyl/Methyl |
21 Aug 2006 11:30:49 AM |
|
|
wrote:
cnctut wrote:
I posted this on sci.chem but no takers--anyone here able to help?
Gents, could someone point me to the octane ratings for ethyl and
methyl alcohol? I thought they were listed in CRC, but I can't put my
finger on the numbers now.
Thanks
Tut
You get interesting info at
http://en.wikipedia.org/wiki/Octane_rating#Examples_of_octane_ratings
Marcel Luttgens
Tut writes:
Marcel and TJ--
Thanks for the inputs.
Best Wishes,
Tut
.
|
|
|
| User: "tj Frazir" |
|
| Title: Re: Octane Ratings for Ethyl/Methyl |
21 Aug 2006 09:42:42 PM |
|
|
I inject O2 into my gas air.
Thats a X5 as stong stroke Pmax 2800 psi .
4 cylinders 4 x 44 inch strokes 60 strokes per minute.
It slams the water pistons past the end flap into the tank to push wate
in the tank up to use the air in its top for a spring.
The tank water drives a rotor 24 inch as 1 inch of vane is pushed out
the rotor when sping loaded sliding vanes run over the cam inside the
rotor.
10 % the gas 13 times the power.
1000 foot pounds at 1000 rpm .
2000 foot pounds at 500 rpm.
.
|
|
|
|
|
|
|
Related Articles |
|
|
